MSK Building Solutions

Save money and energy -  makes your house more energy-efficient

Services

EXTERNAL WALL INSULATION

Basic properties of external wall insulation

The basic benefits of external wall insulation for your home are most importantly lower energy bills, better micro climate inside your home, better insulation inside your home, protection against damp and mould, higher value of your property on the market as well as better overall aesthetics of your home.

Save money and energy – how to make your house more energy efficient?

Judging whether we use a lot of energy to heat our house we base our indication on the demand of heat used during the heating season equivalent to 1 square meter expressed in kWh/m2.
Modern houses should use around 90-120 kWh/m2 per year, whereas old houses use over 200kWh/m2 per year.

The full thermo modernisation of your house will lower your energy to the level that modern houses use and decrease the costs of heating up to 40%. 

Styrofoam-based thermal insulation system is one of the most advanced seamless insulation for external walls with the use of a styrofoam board as a thermo isolation system. This plaster is characterized by exceptionally tight structure, which blocks water penetration to the maximum. It also offers very good water resistant properties, as, when hardening, the silicone resins included create a dense net, which completely blocks rainwater, but accepts vapors contained in the soil. This translates into the future characteristics of the plaster, ones that are the most important for the investor – self-cleaning and high resistance to algae or mould overgrowth. This plaster is recommended also for materials with particularly high diffusion requirements, such as mineral wool.

 

TURBO SO PROTECT – on Styrofoam

 

Application

For performing thermal insulation systems in family housing, public and industrial buildings 


For newly-built and renovated Buildings 


Particularly recommended for Buildings located in the vicinity of forests, parks, water reservoirs, se- aside areas, industrial and urban agglomerations

Outdoors use 


 

Product features

Waterproof and frost-proof

Universal

Elastic mortar

High mechanical durability

Full colour palette

Eliminates thermal bridges

Vapor-permeable plaster


Self-cleaning properties

Resistant to overgrowth

High resistance to UV rays

 

Composition

LEPSTYR 210

Mechanical dowels

VERTEX reinforcing grid

STYRLEP 220/STYRLEP-B 225

TYNKOLIT-SO 332

SILIKON PROTECT 031

 

 

Technical data

colour: one of 380 colours

reaction to fire: B – s1, d0; fire-retardant


resistant to impacts: Category III (10J)/Category I with a double grid layer (10J + perfo test)


vapor permeability: ≤ 2.0 (result acquired for max. grain thickness of 3 mm: 0.3)


concrete adhesion: ≥ 0.25 MPa

Styrofoam-based thermal insulation system

 

Styrofoam-based thermal insulation system is one of the most advanced seamless insulation for external walls with the use of a styrofoam board as a thermo isolation system. This plaster is characterized by exceptionally tight structure, which blocks water penetration to the maximum. It also offers very good water resistant properties, as, when hardening, the silicone resins included create a dense net, which completely blocks rainwater, but accepts vapors contained in the soil. This translates into the future characteristics of the plaster, ones that are the most important for the investor – self-cleaning and high resistance to algae or mould overgrowth. This plaster is recommended also for materials with particularly high diffusion requirements, such as mineral wool.

 

TURBO SO PROTECT – on Styrofoam

 

Application

For performing thermal insulation systems in family housing, public and industrial buildings 


For newly-built and renovated Buildings 


Particularly recommended for Buildings located in the vicinity of forests, parks, water reservoirs, se- aside areas, industrial and urban agglomerations

Outdoors use 


 

Product features

Waterproof and frost-proof

Universal

Elastic mortar

High mechanical durability

Full colour palette

Eliminates thermal bridges

Vapor-permeable plaster


Self-cleaning properties

Resistant to overgrowth

High resistance to UV rays

 

Composition

LEPSTYR 210

Mechanical dowels

VERTEX reinforcing grid

STYRLEP 220/STYRLEP-B 225

TYNKOLIT-SO 332

SILIKON PROTECT 031

 

 

Technical data

colour: one of 380 colours

reaction to fire: B – s1, d0; fire-retardant


resistant to impacts: Category III (10J)/Category I with a double grid layer (10J + perfo test)


vapor permeability: ≤ 2.0 (result acquired for max. grain thickness of 3 mm: 0.3)


concrete adhesion: ≥ 0.25 MPa

Styrofoam-based thermal insulation system is one of the most advanced seamless insulation for external walls with the use of a styrofoam board as a thermo isolation system. This plaster is characterized by exceptionally tight structure, which blocks water penetration to the maximum. It also offers very good water resistant properties, as, when hardening, the silicone resins included create a dense net, which completely blocks rainwater, but accepts vapors contained in the soil. This translates into the future characteristics of the plaster, ones that are the most important for the investor – self-cleaning and high resistance to algae or mould overgrowth. This plaster is recommended also for materials with particularly high diffusion requirements, such as mineral wool.

 

TURBO SO PROTECT – on Styrofoam

 

Application

For performing thermal insulation systems in family housing, public and industrial buildings 


For newly-built and renovated Buildings 


Particularly recommended for Buildings located in the vicinity of forests, parks, water reservoirs, se- aside areas, industrial and urban agglomerations

Outdoors use 


 

Product features

Waterproof and frost-proof

Universal

Elastic mortar

High mechanical durability

Full colour palette

Eliminates thermal bridges

Vapor-permeable plaster


Self-cleaning properties

Resistant to overgrowth

High resistance to UV rays

 

Composition

LEPSTYR 210

Mechanical dowels

VERTEX reinforcing grid

STYRLEP 220/STYRLEP-B 225

TYNKOLIT-SO 332

SILIKON PROTECT 031

 

 

Technical data

colour: one of 380 colours

reaction to fire: B – s1, d0; fire-retardant


resistant to impacts: Category III (10J)/Category I with a double grid layer (10J + perfo test)


vapor permeability: ≤ 2.0 (result acquired for max. grain thickness of 3 mm: 0.3)


concrete adhesion: ≥ 0.25 MPa

MOZATYNK-S 050

To be applied on exposed surfaces, prone to damage and soiling. Particularly recommended for building foundation areas, fence elements, balustrades, also as staircase and corridor wainscot in such public buildings as schools, kindergartens, offices, and in residential housing. We propose the MOZATYNK-S 050 mosaic plaster available in 78 color versions. This solution offers 12 aggregate colors, which can produce nearly 500 color combinations.

 

Mosaic plasters are an alternative to ceramic, stone, clinker wall cladding, paints and structural plasters, or wood paneling. Thanks to their excellent resistance to impacts and abrasions, as well as their resistance to the detrimental effects of water, the finished façade maintains its intact appearance for years. The plasters offer interesting colors and textures, and the surfaces coated with mosaic mortar are easy to maintain in cleanness. It can be washed and scrubbed without discoloring or losing its mechanic durability. In the recent years, mosaic plasters have become increasingly popular as an indoor finishing solution, often replacing traditional ceramic tiles or plasters, as it surpasses them in terms of durability, resistance to impacts and soiling. Mosaic plaster can be successfully used in living rooms, kitchens and bathrooms, as well as in corridors and staircases.

MOZATYNK-S 050 acrylic resin decorative render

  • waterproof 

  • frost-proof 

  • good adhesion 

  • high elasticity 

  • high resistance to UV rays 

  • resistance to weather conditions 

  • for manual and machine-spraying application of 
decorative, thin-layer plaster mortars 

  • outdoor use: for performing decorative pedestal 
surfaces, balcony balustrades, fence elements 

  • indoor use: corridors, staircases, exhibitions 

  • for concrete groundwork, mineral priming plasters, plasterboards, including fiber plasterboards, and for application on reinforced layers in thermal insulation systems with mineral wool and Styrofoam .
© 2018 MSK Building Solutions. Design by grow!

Please publish modules in offcanvas position.